 |
 |
Aluminium Powder Coating
Aluminium Powder Coating is a term used to describe a building which does not carry any dead load from the building other than its own dead load, and one which transfers the horizontal loads (wind loads) that are incident upon it. An Aluminium Powder Coating is designed to resist air and water infiltration, wind forces acting on the building, seismic forces (usually only those imposed by the inertia of the Powder Coating), and its own dead load forces.
Aluminium Powder Coating are typically designed with extruded aluminium members, although the first Aluminium Powder Coating were made of steel. The aluminum frame is typically infilled with glass, which provides an architecturally pleasing building, as well as benefits such as daylighting.Powder Coating differ from storefront systems in that they are designed to span multiple floors.
The loads imposed on the Powder Coating are transferred to the building structure through the anchors which attach the mullions to the building. The building structure needs to be designed and account for these loads. In the case of Powder Coating, this load is made up of the weight of the mullions, anchors, and other structural components of the Powder Coating, as well as the weight of the infill material. Additional dead loads imposed on the Powder Coating, such as sunshades, must be accounted for in the design of the Powder Coating components and anchors.
Address
: Schimmer Metal Standard Company Litmited 
Office : 1070/4-6 Phaholyothin road, Ladyao, Jatrujak,
Bangkok 10900 Thailand, Tel : +662-617-6025-8 Fax :
+662-272-1546
Factory : 1/4 Moo 7 Tambon Banthew, Ampur Sena, Ayutthaya 13110
Thailand, Tel : +663-537-5080-3 Fax : +662-272-1546
Contact : info@schimmermetal.co.th